Description

BMW M2 M3 M4 Motul 8100 Ester Based 5W40 Track Spec Oil F80 F82 F87

Tracking your BMW M2 M3 or M4 and looking to protect your internal engine components?

Look no further than the Motul 8100 Power 5W40 Oil Package.  Blended from the finest ingrediants, this 100% Synthetic Ester based oil has all of the protective properties to ensure your Engine lasts the test of time, whilst performing at its optimum.

This grade of oil is perfect for those heavily tuned engines which create more heat when being pushed hard. This is also a perfect grade for vehicles driven on track days where excessive heat is common.

 

Vehicle application:

BMW M2 F87 & Competition

BMW M3 F80 & Competition

BMW M4 F82 & Competition

Included In This Kit:

7 Litres Of Motul 8100 Power 5W40 Oil

1 X Genuine BMW Oil Filter 11427854445

 

More about this particular oil:

Motul 8100 Power 5W-40 5L

High Performance 100% Synthetic – ESTER engine oil inspired by the competition and specially designed for Gasoline or Diesel engines, tuned or high performance, naturally aspirated or turbocharged, indirect or direct injection, and operating over a wide range of engine revs and temperatures, in the most severe road or racing conditions.

Suitable for Gasoline and Diesel engines requiring an API SP viscosity grade 5W-40 lubricant.

The exclusive formula of MOTUL 8100 POWER 5W-40 is compatible with biofuels (especially the Ethanol E85) and after-treatment systems. It also protects downsized engines from the risk of LSPI (Low-Speed Pre-Ignition), and its optimised viscosity brings the best compromise between power and reliability to your engine.
Very good compatibility with catalytic converters.
Suitable for all types of Gasoline fuels, leaded or unleaded, Ethanol, LPG, diesel and biofuels.
This type of oil may be unsuitable for use in some engines. Before use, always refer to the owner’s manual.

Standards: API PERFORMANCE SP

Properties :

Viscosity grade SAE J 300 5W-40
Density at 20°C (68°F) ASTM D1298 0.845
Viscosity at 40°C (104°F) ASTM D445 87.1 mm²/s
Viscosity at 100°C (212°F) ASTM D445 14.7 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.9 mPa.s
Viscosity Index ASTM D2270 177
Pour point ASTM D97 -48°C / -54°F
Flash point ASTM D92 236°C / 457°F
Sulphated ash ASTM D874 0.79% mass
TBN ASTM D2896 7.9 mg KOH/g